Farbacoat Profy

In the series of modified alkyd coatings «Farbacoat PROFY», depending on the scope and composition, there are the following modifications:

primer enamel «Farbacoat PROFY 60»,
soil «Farbacoat PROFY 63»,
enamel «Farbacoat PROFY 65».

«FARBACOAT PROFY 60» alkyd primer-enamel is designed to protect process equipment, machinery, mechanisms, mining equipment, automotive and agricultural equipment for various purposes. Enamel is resistant to atmospheric and mechanical factors, can be applied without prior priming, provides a semi-matt coating, with good adhesion to the base, elastic. It is recommended as a single layer finishing system for corrosion protection.

«FARBACOAT PROFY 63» alkyd modified soil is designed for priming steel structures and elements, machines and equipment used in the field of industrial, marine, river and urban use. Thixotropic primer has anti-corrosion properties, very high adhesion to steel surfaces and high mechanical stability. Quick-drying, provides semi-matt coating.

«FARBACOAT PROFY 65» modified alkyd enamel of universal application. It forms a glossy coating, has a high adhesion to the base, elasticity, as well as resistance to weathering and temperature changes. Enamel is intended for protection of technological equipment, machines, mechanisms, mining equipment, automotive and agricultural equipment for various purposes, structures used in the field of marine, river, urban and industrial use.

METHOD OF APPLICATION, CONDITIONS OF APPLICATION AND CURING OF COATING:

Stir the enamel “Farbacoat Pro 60” thoroughly. The surface to be applied must be pre-prepared, dry, free from salt, grease, dust and other contaminants. The surface temperature above the dew point is at least 3 ° C (avoid condensation); good ventilation.
Thoroughly mix the soil “Farbacoat Profy 63”. The surface to be applied must be pre-prepared, dry, free from salt, grease, dust and other contaminants. The surface temperature above the dew point is at least 3 ° C (avoid condensation); good ventilation. Interval of overlap: minimum — 12 hours, maximum — 12 days. This time applies only to the recommended thickness of coating, drying in conditions of good ventilation. The time of application of subsequent layers depends on the temperature, ventilation conditions, the number of layers and the thickness of the coating. Subsequent staining: alkyd enamel Farbacoat Profy 65, alkyd primer-enamel Farbacoat Profy 60.
Thoroughly mix the enamel «Farbacoat Prof 65». The surface to be applied must be pre-prepared, dry, free from salt, grease, dust and other contaminants. The surface temperature above the dew point is at least 3 ° C (avoid condensation); good ventilation. Thinner: solvent, nefras, white spirit 0 — 20% vol. For the best result, it is recommended to use in the complex: surface preparation — primer “FFRBAKOUT PROFY 63”, primer-enamel “FARBACOAT PROFY 60”.

Референц